Back to search

University of Strathclyde

Development of electron backscatter diffraction as a tool to image and analyse threading dislocations in GaN

Abstract

dc:description.abstract

In this thesis, a scanning electron microscope (SEM) based technique known as electron backscatter diffraction (EBSD) is utilised and developed to investigate types ofcrystalline defects known as threading dislocations (TDs) in the III-nitride semiconductor gallium nitride (GaN). GaN is used prolifically in electronic and optoelectronicdevices such as in high electron mobility transistors (HEMTs) and light-emitting diodes(LEDs). However, the high densities of TDs in GaN limits device performance by reducing electron mobility due to their associated strain and scattering effects, causingnon-radiative recombination, and inducing local bandgap variations across the semiconductor. TDs in GaN are most commonly edge, screw, and mixed TDs. Each ofthese types has its own unique associated strain and misorientation profile that canaffect the semiconductor’s structure, and also its (opto)electronic properties.The first step in analysing these defects within GaN is to obtain high-quality images of their distributions near to the surface of the semiconductor. By doing so it ispossible to calculate TD densities (TDDs) and, if the imaging conditions are correctsuch that surface steps are also visible, identify which TDs are edge type or have screwcomponent. This was achieved through the development of the virtual diode centreof mass (VDCOM) imaging technique. This is a post-processing technique applied toEBSD datasets that produces high signal images of the same area with different dominant contrast mechanisms- either crystallographically dominated (showing TDs) ortopographically dominated (showing surface steps and TDs)- by monitoring changes insignal within different regions of the EBSD detector. By utilising the pixelated EBSDdetector in this way, there is much greater flexibility in the different images that can beacquired with only one dataset, versus the more traditional SEM imaging technique of electron channelling contrast imaging (ECCI) which uses individual hardware diodes.Next, the strain and misorientation (lattice rotations) associated with TDs weresimulated using an analytical simulation written in Python. It was found that the misorientation and strain associated with a screw TD is significant both in-plane (aroundthe specimen z axis) and out-of-plane, while that of the edge TD is significant forcurrent EBSD measurements only in-plane. This indicated that if the misorientationand strain profiles could be measured and mapped with sufficient resolution, then bycomparing in-plane and out-of-plane strain and misorientation, it would be possible todistinguish between edge TDs and screw component TDs (screw and mixed) in GaN.Strain and misorientation maps were then produced using EBSD with sufficientresolution to resolve individual TDs. This allowed the overall subgrain structure tobe qualitatively interrogated and also for the TDs to be correctly identified as screwcomponent or edge TDs. In combination with the VDCOM technique, this means thatTDs were identified and their densities calculated for a range of GaN samples. Themapping of relative strain and misorientation with such a high resolution also providesa mechanism to visualise how the strain and misorientation due to TDs varies across aparticular GaN sample.Another post-processing imaging modality was developed using Radon transformations, Radon centre of mass (RCOM) imaging. This allows EBSD users to image usingthe distortion of a particular crystal plane to provide contrast, much like in transmission electron microscopy (TEM). This means that only TDs affecting a particular planeare imaged, and when utilising particular invisibility criteria, the TD types can then beidentified. For plan-view measurements however, this technique is limited by surfacerelaxation, and so full identification would require cross-sectional EBSD.

Degree

thesis:*
Name dc:type.qualificationname
phd
Level dc:type.qualificationlevel
doctoral-pg
Grantor dc:publisher.institution
University of Strathclyde
Year dc:date.issued
2025

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Hiller, Kieran Paul
Advisors dc:contributor.advisor
  • Trager-Cowan, Carol
  • Bruckbauer, Jochen
Author Identifier dc:creator.authoridentifier
  • 202055061

Rights

Identifiers

dc:identifier.*
Identifier
T17264

Chain of custody

source
Harvested from
University of Strathclyde
Base URL
stax.strath.ac.uk/catalog/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Hiller, Kieran Paul. Development of electron backscatter diffraction as a tool to image and analyse threading dislocations in GaN. doctoral-pg thesis, University of Strathclyde, 2025. https://stax.strath.ac.uk/concern/theses/p5547s02m