Back to search

University of Strathclyde

Monitoring of electrical resistivity changes in the ground laboratory model caused by diesel spillage and injetion [sic] of oxygen release compound

Abstract

dc:description.abstract

The aim of this research is to verify the effectiveness of the electrical resistivity method in the study and monitoring of the pollutant dispersion and migration in the soil. In this particular study, Diesel has been used as the detection pollutant and a laboratory model was created in a tank comprised of a bottom clay layer covered by a sandy layer.Two narrow sectors separated by a permeable screen was included to allow permanent groundwater flow through the soil. In addiction, [sic] a permeable reactive barrier was made in the model with an oxygen release compound (i.e. ORC-Advanced by Regenesis®). When the model was used in the laboratory a mini electrical resistivity array was used to monitor the electrical resistivity properties that the media displayed. In the laboratory model the polltant was spilt on the top of the sandy layer on the left hand side and on the bottom of the sandy layer in the centre. This allowed simulation of very different situations and to study how these differences influence the migration and distribution dynamics of the pollutant. Subsequentily, [sic] the permeable reactive barrier was put in place by injecting an Oxygen Release Compound (i.e. ORC-Adv) in 24 mini boreholes along a cross section in the middle of the model tank. Data concerning Dissolved Oxygen, pH and Conductivity of the water used in the laboratory model were collected with field probes and subjected to laboratory investigation. Apparent electrical resistivity was measured using an electrical resistivity meter and all data were analysed also using statistical analyses. During the study period changes in electrical resistivity caused by pollutant dispersion in the sandy layer, water level fluctuations and presence of the reactive barrier were observed in detail. Data analysis showed that the electrical resistivity investigation method clearly detected the changes in resistivity due to pollutant spillage, influence of water level fluctuation, path of pollutant dispersion and effects of the permeable reactive barrier. The results of this study are summarized using graphs and several electrical resistivity images supported by RES2DINV® software.

Degree

thesis:*
Name dc:type.qualificationname
mphil
Level dc:type.qualificationlevel
masters-pg
Grantor dc:publisher.institution
University of Strathclyde
Year dc:date.issued
2008

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Montinaro, Antonio
Advisor dc:contributor.advisor
  • Sentenac, Philippe

Rights

Identifiers

dc:identifier.*
Identifier
T12176

Chain of custody

source
Harvested from
University of Strathclyde
Base URL
stax.strath.ac.uk/catalog/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Montinaro, Antonio. Monitoring of electrical resistivity changes in the ground laboratory model caused by diesel spillage and injetion [sic] of oxygen release compound. masters-pg thesis, University of Strathclyde, 2008. https://stax.strath.ac.uk/concern/theses/wp988k33r