Back to search

University of Strathclyde

Nanometric characterisation of III-nitride semiconductors

Abstract

dc:description.abstract

An investigation on the optical, composition and surface properties of the III-nitride ternary alloys InxGa?-xN and Al?-xInxN is presented. The structures studied are single quantum wells (SQWs) and epilayers. The effects of various GaN cap thicknesses, well widths, Si doping concentrations in the barriers, InN compositions, epilayer thicknesses and substrates are examined. The techniques used are photoluminescence (PL) and PL excitation (PLE) spectroscopy for investigating the optical properties, wavelength dispersive x-ray (WDX) and Rutherford backscattering spectrometry (RBS) for measuring InN composition. RBS is also used to study the crystalline quality of the samples; and secondary electron microscopy (SEM) and atomic force microscopy (AFM) for examining the surface quality. InxGa?-xN/GaN SQWs with a variety of GaN cap thicknesses and different barrier doping levels were studied using PL spectroscopy. It was demonstrated that the InxGa?-xN/GaN SQWs with thin caps give reduced PL intensity and larger PL linewidths, indicating degradation due to the increasing effects of the surface. As the doping level in the GaN barrier layers increases the luminescence intensity decreases, the linewidth increases and the SQW transition energy red-shifts. The latter is attributed to band-gap renormalisation. The properties of GaN/A?-xInxN SQWs were investigated for varying quantum well width and for different substrates. The GaN/A?-xInxN SQW luminescence peak energy decreases as the well-width increases, mainly due to the intense spontaneous polarisation fields, and its dependence on excitation power reveals the effects of carrier screening. Al?-xInxN epilayers were also characterised and here the PL peak emission energies decrease with increasing InN composition. The energy bandgap bowing parameter is found to be linearly decreasing with increasing InN composition in the limited composition range studied. Cracks are observed in highly tensile strained epilayers with x < 0.10. For variations in layer thickness the surface quality and crystal quality worsens with increasing thickness. Finally, the samples on FS-GaN substrates have 3 to 4 atomic % more InN than those grown on sapphire. Surface quality degradation is observed in samples grown on non-polished sapphire substrates and AlyGa?-yN templates with high Al content.

Degree

thesis:*
Name dc:type.qualificationname
phd
Level dc:type.qualificationlevel
doctoral-pg
Grantor dc:publisher.institution
University of Strathclyde
Year dc:date.issued
2009

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Tan, Lay-Theng

Rights

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.501654
T12325

Chain of custody

source
Harvested from
University of Strathclyde
Base URL
stax.strath.ac.uk/catalog/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Tan, Lay-Theng. Nanometric characterisation of III-nitride semiconductors. doctoral-pg thesis, University of Strathclyde, 2009. https://stax.strath.ac.uk/concern/theses/zc77sq19f