Back to search

University of Alabama Birmingham

Oxidation of Mercury During Selective Catalytic Reduction of Nitric Oxide

Abstract

dc:description.abstract

A promising method for mercury removal from the gaseous products of coal combustion is the catalytic oxidation of elemental mercury to water-soluble mercuric chloride during selective catalytic reduction of NOx by ammonia, followed by removal of the oxidized mercury during wet flue gas desulfurization. Measurements of the mercury species distribution and sulfate formation at the outlet of a 310 mm long square cell monolithic V2O5-WO3/TiO2 commercial SCR catalyst showed the following trends: (1) Mercury oxidation was highly sensitive to HCl at the low levels characteristic of Powder River Basin subbituminous coals (0-5 ppmv). (2) Mercury oxidation was inhibited by NH3, and promoted by NO in the absence of NH3. The inhibitory effect of NH3 increased with decreasing HCl, increased on approach to stoichiometric NH3/NO, and increased markedly in the presence of excess NH3. (3) CO had a strong inhibitory effect on mercury oxidation at low levels of HCl, which decreased with increasing HCl levels. Variation in the CO content of flue gas when burning low chlorine coals is thus a possible source of variability and uncertainty in the extent of mercury oxidation in SCR. This is regarded as one of the most significant findings of the work and addressed a specific research need identified by Presto et al. (2006) and Presto and Granite (2006). Implementation of the Tennessee Valley Authority’s thermal mercury reduction system for the determination of total mercury resulted in a great improvement in data quality and a marked decrease in the time required to identify steady-state conditions, resulting in a higher probability of success in each test run attempted. Measurements of sulfate formation made in conjunction with the mercury oxidation measurements showed little change in SO2 oxidation to SO3 with increasing HCl volume fraction in the absence of NH3. However, the addition of NH3 inhibited the oxidation of SO2 to SO3, regardless of HCl content. CO had little effect on the oxidation of SO2 to SO3. A one-dimensional mass transfer and chemical reaction model was developed for three of the important processes in SCR: NO reduction by NH3, mercury oxidation by HCl, and SO2 oxidation by O2.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (PhD)
Level thesis:degree_level
Dissertation

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Tong, Giang
Contributors dc:contributor
  • Peter M Walsh
  • Heng Ban
  • Chih-Hsiung Cheng
  • Thomas K Gale
  • Melinda M Lalor

Subjects

dc:subject × 6

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
University of Alabama Birmingham
Base URL
digitalcommons.library.uab.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Tong, Giang. Oxidation of Mercury During Selective Catalytic Reduction of Nitric Oxide. Dissertation thesis, https://digitalcommons.library.uab.edu/etd-collection/109