Back to search

University of Alabama Birmingham

A Low-Cost Planar Inkjet-Printed Carbon Nanotube Field Effect Transistor For Sensor And Circuit Applications

Abstract

dc:description.abstract

The semiconductor-based transistor is an essential building block of electronic components, computing applications, and sensors. However, the fabrication of this primary electronic element is complex and costly, especially when considering flexible electronics for bio-sensing applications. This thesis work proposes a new circuit manufacturing technique to print planar inkjet-printed carbon nanotube field effect transistor (CNTFET), sensor and circuits on paper and polyethylene terephthalate (PET) film substrate to reduce the complexity of the system and to lower the cost of conventional fabrication schemes. Single walled carbon nanotubes (SWCNTs) are being used as semiconductor ink for an inkjet-printer to facilitate and fabricate two types of transistors. Both thin (0.3 mm gate separation) and thick (0.5 mm gate separation) transistors with wide (4 mm) and narrow (2 mm) channel length have shown nearly linear characteristics of resistivity for a range of applied gate voltages. Though the experimental results are not similar compared to a real transistor, the mathematical model shows excellent usage of the proposed inkjet-printed CNTFET for various electronic applications including but not limited to biosensors, healthcare measurements, and circuits. CNTFET model was used in PSpice circuit to check its usability in practical applications. Also, printed sensor circuits were studied for the validity of the inkjet printing technologies being used in flexible electronics fabrication. Experimental results show that environmental factors play a significant role in the performance of the printed transistors and circuits.

Degree

thesis:*
Level thesis:degree_level
Thesis

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Islam, Md Toriqul
Contributors dc:contributor
  • Mohammad Rafiqul Haider
  • Karthikeyan Lingasubramanian
  • Leon Jololian

Subjects

dc:subject × 7

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
University of Alabama Birmingham
Base URL
digitalcommons.library.uab.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Islam, Md Toriqul. A Low-Cost Planar Inkjet-Printed Carbon Nanotube Field Effect Transistor For Sensor And Circuit Applications. Thesis thesis, https://digitalcommons.library.uab.edu/etd-collection/2017