Back to search

University of Alabama Birmingham

Retention Of Resin Composite Cam Crowns Following Different Bonding Protocols

Abstract

dc:description.abstract

Objectives: Resin composite CAM materials offer more efficient milling, however, there is a high incidence of clinical debonding when this material is used for full-coverage crowns. The aim of the present study is to evaluate the effect of different surface treat-ments and primers on the crown retention of a new resin composite CAM material. Methods: 120 molars were prepared with a 24 degree taper, 1.5mm height, and axial walls in dentin. Surface area was measured by digital microscopy and preparations were scanned with an intraoral scanner. Crowns were milled from an experimental com-posite material with 4mm occlusal height. Teeth were randomly allocated to 12 groups (n= 10) based on the possible combinations of three surface treatments (Control, Alumina air abrasion [50µm Al2O3 at 0.28MPa], Hydrofluoric acid etch [5% HF acid for 20 sec]), silane application (with or without Kerr Silane), and adhesive application (with or without Optibond XTR adhesive). Optibond XTR adhesive was applied to the tooth preparations and crowns were bonded with MaxCem Elite. Crowns were fatigued for 100,000 cycles at 100N in water. Crowns were debonded in tension in a universal testing machine at 1mm/min. Crown retention strength (maximum load/area of preparation) was analyzed using a three-way ANOVA with Tukey’s post-hoc tests. Results: Surface treatment, silane and adhesive applications independently affect the retention force (p<0.05). All interactions were not statistically significant. Alumina airborne abrasion surface treatment, silane and adhesive applications all boost retention strength. Conclusions: Resin composite crowns should be alumina particle abraded and coated with silane and adhesive.

Degree

thesis:*
Level thesis:degree_level
Thesis

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Nejat, Amir Hossein
Contributors dc:contributor
  • Nathaniel C Lawson
  • John O Burgess
  • Jack E Lemons
  • Amjad Javed
  • Ramakiran Chavali

Subjects

dc:subject × 4

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
University of Alabama Birmingham
Base URL
digitalcommons.library.uab.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Nejat, Amir Hossein. Retention Of Resin Composite Cam Crowns Following Different Bonding Protocols. Thesis thesis, https://digitalcommons.library.uab.edu/etd-collection/2565