Back to search

University of Alabama Birmingham

Processing, Testing, And Characterization Of A Novel Continuous Fiber Thermoplastic Composite Filament For Extrusion Based Additive Manufacturing

Abstract

dc:description.abstract

Polycaprolactone (PCL) is a thermoplastic polymer with a low melting point (60°C) and is recognized for its biodegradability and biocompatibility, both of which makes PCL suitable for 3D printing components in biomedical applications. However, its mechanical properties are relatively low and insufficient for some applications such as bone engineering and scaffold design. This study aims to overcome these limitations in mechanical properties by introducing high-performance polymer fibers and by using the fused deposition modeling (FDM) process to print continuous fiber-reinforced PCL composites. This research work focuses on development, testing, and characterization of continuous fiber reinforced PCL composite filaments for extrusion based additive manufacturing. Polypropylene (PP) and polyamide 6 (PA6) fiber reinforced PCL composite filaments were produced by a hot melt impregnation process. A method for characterizing the tensile properties of continuous fiber composite filaments was developed in this study. Furthermore, the continuous fiber reinforced PCL composite filaments, were evaluated on their mechanical properties. The effects of fiber content on the processability and performance of the composite filament were evaluated and compared. Using an FDM printer modified from a conventional plastic printer, tensile and flexural PA6/PCL composite samples were successfully printed. The relationship among printing parameters, microstructure, and mechanical properties of the PA6/PCL FDM composites was investigated. The influence of fiber treatments on fiber-matrix interfacial adhesion was also investigated. Various chemical and physical fiber treatment methods were applied on the polymer fiber to enhance the fiber and matrix interfacial bonding. In addition, a novel fiber pull-out test method was developed to evaluate interfacial bonding strength between the PA6 fiber and PCL matrix. The effects of fiber treatment and interfacial bonding strength on the mechanical behavior of polymer fiber-reinforced composites were studied.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (PhD)
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Materials Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Yan, Yongzhe
Contributors dc:contributor
  • <p>Haibin Ning<br>Selvum Pillay</p>
  • <p>Alan Eberhardt<br>Charles Monroe<br>Haibin Ning<br>Selvum Pillay<br>Vinoy Thomas</p>

Subjects

dc:subject × 1

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
University of Alabama Birmingham
Base URL
digitalcommons.library.uab.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Yan, Yongzhe. Processing, Testing, And Characterization Of A Novel Continuous Fiber Thermoplastic Composite Filament For Extrusion Based Additive Manufacturing. Dissertation thesis, https://digitalcommons.library.uab.edu/etd-collection/7293