Abstract
dc:descriptionSilicon membranes have been fabricated and etched into mesh structures using both wet and Cl₂ plasma etching. The most repeatable process involoved wet etching triple bonded wafers with a buried oxide layer. A recipe to build Si meshes, with a grid spacing of 375 μm and leg cross-sections of 5 μm by 30 μm, from 5 μm thick membranes is described. The meshes are supported by 4 legs that are each 30 μm wide and 1 mm long. Also, the resistivity of thin gold films was measured for temperatures ranging from 4.2 K to 300 K. It was found that the ideal thickness, that leads to a sheet resistance of at 300 mK for of 5μm by 385μm gold lines, was 150 Å. A bolometer building process that incorporates the gold evaporations with the mesh building procedure is given, although preliminary attempts to produce bolometers have been unsuccessful.
Degree
thesis:*- Name thesis:degree_name
- Master of Science - MSc
- Level thesis:degree_level
- master's
- Discipline thesis:degree_discipline
- Physics
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 2000
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Chen, Karen
Rights
dc:rights- Statement dc:rights
-
- For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/10248