Back to search

University of British Columbia

Stick-slip friction and rotational vibration under large contact areas and uneven distributed loads

Abstract

dc:description

The proposed research is aimed at the analysis of stick-slip frictional phenomenon when large contact areas are involved and, due to the physical structure of the system, high uneven contact loads are generated. The study will look at both mechanistic and tribological aspects of the problem. The main objective of the research is to achieve a better understanding of the phenomenon based on experimental observations and to develop a mathematical representation under realistic conditions. A non-linear finite element model has been developed using ANSYS to obtain an understanding of the contact pressure distribution at the interface of contact of large surfaces due to the applied loads. A mathematical model of this distribution has been derived based on the results of the ANSYS solution. The friction torque acting at the contact surface has then been estimated by integrating elemental friction torque over the entire plate area. The LuGre friction model for the localized contacts has been extended for large contact areas using an integration approach. The simulations have been carried out using Simulink to understand the dynamic behavior of the integrated LuGre model as well as to assess the effect of various system parameters on the stick-slip vibrations. A test rig has been designed and fabricated to re-construct the realistic situations that occur in large robots and excavators for example. The instrumentation, signal processing, data acquisition and analysis have subsequently been carried out. The experiments have been conducted to investigate the effect of various parameters such as total load, loading configuration, speed, and spring stiffness on the stick-slip vibrations. The simulations using proposed integrated LuGre model are found to be in good agreement with the experimental results. The experiments have revealed that with all other parameters being same, the stick-slip vibrations are more likely to occur under concentrated loading as compared to distributed loading for the same total load.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2000

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Baleri, Mudlagiri

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/10546

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Baleri, Mudlagiri. Stick-slip friction and rotational vibration under large contact areas and uneven distributed loads. master's thesis, University of British Columbia, 2000. http://hdl.handle.net/2429/10546