Back to search

University of British Columbia

A dynamically reconfigurable system architecture and FPGA based servo controller for distributed machine tool control

Abstract

dc:description

This thesis presents the design and analysis of a novel system and protocol for the automatic configuration and dynamic reconfiguration of distributed machine tool control systems. The basis for the system is the UBC Open Architecture Control System reference model. A virtual machine abstraction of the underlying machine tool controller is implemented in an object-oriented extension to the ANS Forth programming language, and used to facilitate hardware independence. A reconfigurable binding table translates virtual machine method calls into appropriate hardware dependent routines. These hardware dependent routines are established in the system via the interpretive translation of a stream of tokenized code, retrieved from device firmware. The tokenizing scheme used is based on the IEEE 1275 Open Firmware standard. A Field-Programmable Gate Array based servo controller, designed to be compatible with the Open Configuration System, is also presented. The servo controller is implemented on a prototyping board incorporating a 20,000 gate Xilinx FPGA and 32 kiloByte RAM chip, with the addition of a filter to convert a pulse-width modulated signal to an analog amplifier reference signal. The controller is capable of driving a single machine tool (or robotic) axis, and has been integrated into a laboratory test-stand comprising a current-controlled DC motor loop and incremental quadrature position feedback.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2000

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Oldknow, Kevin David

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/10737

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Oldknow, Kevin David. A dynamically reconfigurable system architecture and FPGA based servo controller for distributed machine tool control. master's thesis, University of British Columbia, 2000. http://hdl.handle.net/2429/10737