Back to search

University of British Columbia

Tool-part interaction in composites processing

Abstract

dc:description

The ability to process composite structures with a high degree of dimensional control remains a barrier to the further implementation of composite materials in commercial applications. Poor control over final part shape can necessitate custom shimming of composite parts or remachining of tooling, resulting in excessive manufacturing costs. Mechanical interaction between the tool and part has been identified as a significant contributor to dimensional control problems yet this phenomena remains poorly understood. Tool-part interaction can often manifest itself in the warpage of initially flat laminates. In the present work an experimental study was performed to identify the effect that part geometry and process variables had on this warpage. Part geometry had a much greater influence on warpage than autoclave process pressure did, while tool surface condition was not observed to have any significant effect. A second experimental study was performed whereby a thin aluminum tool was instrumented with strain gages. The mechanical strain induced in the instrumented tool provided a means for estimating the magnitude and distribution of shear stress operative at the tool-part interface. Both sliding and sticking interface conditions were observed to occur at various times throughout the cure cycle. The interfacial shear stress increased with increasing part degree of cure. An analytical model to predict warpage was developed based on the conclusions of the instrumented tool investigation. This model agreed well with the trends in part warpage which were identified experimentally. Process induced warpage was also simulated using an existing numerical process model. The current method of accounting for tool-part interactions via an elastic shear layer was unable to correctly represent the interface behavior, however, reasonable agreement with experimental results was possible by using a sufficiently low modulus shear layer. The value assigned to the shear modulus of the part was also observed to have a significant effect on the success with which part warpage could be modelled.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2001

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Twigg, Graham

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/11482

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Twigg, Graham. Tool-part interaction in composites processing. master's thesis, University of British Columbia, 2001. http://hdl.handle.net/2429/11482