Back to search

University of British Columbia

DSP control of a three phase UPS inverter

Abstract

dc:description

The demand for three-phase uninterruptible power supplies has increased with the decrease in reliability of power supplied by power utilities. A single three-phase uninterruptible power supply (UPS) can typically supply many loads at a time. A UPS must be able to supply relatively undistorted output line voltages with highly non-linear loads. Many papers have been devoted to introducing new control schemes that can supply these loads effectively. A new control scheme is introduced, in this work, which is implemented with a digital signal processor (DSP). The controller acts in a stationary reference frame as opposed to the commonly used rotating reference frame. Although using a stationary reference frame can create phase errors, the control algorithm is computationally more efficient than using a rotating reference frame. The proposed technique uses two line voltages and the corresponding differential output filter inductor currents for those lines as the control variables. As a result, this technique utilizes fewer sensors compared to techniques using a rotating reference frame. In this work, the plant model is developed and the stability of the controller is analyzed. The controller design is facilitated with the use of a Mathcad workspace, Steady-state simulations and experimental results are presented for a balanced resistive load. Even with relatively slow inner current loops, the performance of the controller is acceptable. Slow current controllers are used because of large noise in the current measurements of the experimental inverter. This work provides the basis to further investigate the feasibility of using the proposed controller to supply non-linear loads.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Electrical and Computer Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2001

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Wicks, Kenneth

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/11496

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Wicks, Kenneth. DSP control of a three phase UPS inverter. master's thesis, University of British Columbia, 2001. http://hdl.handle.net/2429/11496