Back to search

University of British Columbia

Computational studies of the flow around rounded and ducted tip hydrofoils

Abstract

dc:description

All lifting surfaces that terminate in a moving fluid create tip vortices. Tip vortices on marine propellers reduce the efficiency of the blades and can cause cavitation. Cavitation is an undesirable effect since it can cause pitting and erosion of the propeller and surrounding equipment and is a source of vibration and noise. Several tip devices have been proposed to suppress the tip vortex roll-up and reduce the strength of the tip vortices. One of those is a flow-through duct installed at the tip of a propeller blade. In this research the flow over ducted and rounded tip hydrofoils was studied using the finite-volume flow solver CFD-ACE(U) and a k-e turbulence model. First the flow over two rounded tip hydrofoils, which were selected based on experimental data available, was studied with validation in mind. It was shown that away from the tip of the hydrofoil the sectional lift was predicted within 2% of experimental data whereas close to the tip the difference in lift reached up to 12%. The spanwise location of the vortex core was shown to be well predicted. This study was followed by studying the flow over a ducted tip hydrofoil. For comparative purposes a rounded tip hydrofoil of the same cross-section and aspect ratio run under the same flow conditions was studied. A good agreement in flow pattern was achieved between the computational results and available experimental data. A good agreement was also achieved between the maximum axial and tangential velocity immediately downstream of the hydrofoil. The computations showed that the ducted tip hydrofoil sheds less bound circulation over the majority of the wing span than does the rounded tip hydrofoil. The tip vortex from the ducted tip hydrofoil is shed in the shape of a duct instead of a concentrated circular vortex from the rounded tip hydrofoil.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2001

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ingvarsdottir, Hildur

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/11767

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Ingvarsdottir, Hildur. Computational studies of the flow around rounded and ducted tip hydrofoils. master's thesis, University of British Columbia, 2001. http://hdl.handle.net/2429/11767