Back to search

University of British Columbia

Intraoperatively measuring ligamentous constraint and determining optimal component placement during computer-assisted total knee replacement

Abstract

dc:description

The biomechanical goals of total knee replacement surgery are to restore neutral alignment to the lower limb and balance the soft tissues of the knee. Currently, this soft tissue balancing is considered an art; there are few ways to quantify the appropriateness of the soft tissue balancing that a surgeon does. Furthermore, the few existing techniques for quantifying balance are applied after the bone cut is complete, so the state of the soft tissue cannot enter into the surgical planning process. Since problems with soft tissue balancing represent one of the major unsolved problems in knee surgery, there is considerable interest in developing tools to assist with this process In this thesis, I report on the development and preliminary testing of two specific algorithms. The first is an intraoperative method to precisely identify ligament anatomy for use in a kinematic knee model using a computer assisted surgical system. The second is a method to determine the component placement that minimizes ligament strain and laxity throughout the entire range of motion of the knee. Both methods are requirements for a comprehensive surgical advisory system. The ligament identification method proved sufficiently repeatable on porcine specimens to warrant further testing on cadaver specimens. The component placement algorithm was able to determine optimal placement locations accounting for imbalances introduced on a simulated knee model, and was robust to errors introduced when using the ligament measurement routine to obtain model inputs. Further testing on physical knee models is required for validation of the method's ability to determine optimal component placement and predict passive kinematics. I conclude that the two methods presented have the potential to provide the surgeon with accurate quantitative intraoperative information for use in soft-tissue balancing and surgical planning procedures and warrant further investigation.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2002

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Illsley, Scott Garth

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/12102

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Illsley, Scott Garth. Intraoperatively measuring ligamentous constraint and determining optimal component placement during computer-assisted total knee replacement. master's thesis, University of British Columbia, 2002. http://hdl.handle.net/2429/12102