Back to search

University of British Columbia

Development of a piezoelectric tool actuator for precision turning

Abstract

dc:description

Precision turning as an alternative to conventional finish machining operations of cylindrical components offers significant reductions in manufacturing cost and cycle time. In this thesis the development of a piezoelectric tool actuator for precision turning of shafts is presented. A review of research conducted in the areas of precision turning, piezoelectric actuator development, and micropositioning systems design is presented. Mounted to a conventional turning machine, the tool actuator overcomes the limitations of machine tool feed drives by providing precise control of the finishing depth of cut. In this manner part tolerances are achieved in one setup on a single machine, without the need for subsequent finishing operations. Design of the actuator system was driven by constraints on motion range and resolution, size, and structural properties. Tool motion is provided through the use of a high voltage piezoelectric translator housed within a monolithic solid flexure. A capacitive position sensor provides feedback of tool motion to the controller. In order to be practical in an industrial setting the actuator design is compact, and provides an interface for exchangeable tooling. The specifications of the actuator are 36 micron stroke, 370 N/micron stiffness, and 3200 Hz natural frequency (radial direction). A sliding mode control scheme was implemented to regulate tool position, and reject disturbances due to cutting forces and actuator non-linearity. The actuator was experimentally verified through machining tests in both laboratory and industrial sites. Results showed that positioning resolution of 20 nm is achievable in precision finishing, and that the commanded controller position was accurately reflected on the machine workpiece. Average surface roughness for 4340 steel (36-40 HRC) was less than 0.3 microns, and less than 0.15 microns for hardened 4320 steel (58-62 HRC).

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2002

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Woronko, Andrew Stanley

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/12274

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Woronko, Andrew Stanley. Development of a piezoelectric tool actuator for precision turning. master's thesis, University of British Columbia, 2002. http://hdl.handle.net/2429/12274