Back to search

University of British Columbia

Fracture and blending of wood composites with discontinuous adhesive bonds

Abstract

dc:description

To minimize resin consumption in the manufacture of oriented strand board, while maintaining the mechanical properties of the finished product, several factors must be optimized. The focus of this work is to answer the following questions: what is the optimum droplet diameter and dot-pitch (distance between droplet centres), and how should the rotary drum blender be operated to achieve this? This work examines the effect of droplet diameter and dotpitch on the Mode I fracture toughness of a discontinuous adhesive bond and presents preliminary results on the blending dynamics of oriented strand board. The major conclusions from the work are that the fracture toughness appears to increase linearly with resin droplet diameter and with the square root of bonded area, a finding that is supported by an analytical model. Furthermore, the study shows that the fracture toughness is not strongly dependent on the amount of resin applied. Therefore, by modifying the droplet diameter and dot-pitch it should be possible to maintain the current mechanical properties of the board with reduced resin consumption. Since the bond fails in the substrate, a similar square root relationship between the retention of solid wood fracture toughness by the discontinuous bond and the area of solid wood failure is postulated and confirmed. A minimum ratio of bonded area to total area of 0.3 is suggested, below which the bond does not form. To determine the above results a modified flexographic printing technique was used to deposit resin droplets of known size and spacing. The mass of resin applied was relatively constant, however, the mass applied is affected by resin viscosity, relative humidity and substrate moisture content. The preliminary work on blending examines the effect of blender rotation speed and drum-wall friction on the tumbling behaviour of strands. Increasing the rotation speed causes the strands to pass through various tumbling regimes, from sliding to centrifuging. Experiments on drum-wall friction show the necessity of flights. Initial models in the area ignore the effect of friction, which limits their usefulness.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2002

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Conrad, Michael Perry Cyrus

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/12435

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Conrad, Michael Perry Cyrus. Fracture and blending of wood composites with discontinuous adhesive bonds. master's thesis, University of British Columbia, 2002. http://hdl.handle.net/2429/12435