Back to search

University of British Columbia

Investigation of the in plane seismic response of solid tilt-up wall systems

Abstract

dc:description

Within a building constructed mostly of solid tilt-up panels, the strength and inelastic response of wall systems is almost entirely controlled by the connections since solid wall panels are inherently stiff and strong. Currently system design is done without designing for either a sliding or overturning mechanism to form, and connection design to resist each of these mechanisms are done independently of one another. Designers add connections between two or more walls panels to increase the rocking resistance of the system, and add connections between wall panels and the base slab to provided horizontal sliding resistance without considering how each of these remedies may influence the other. Since vertical uplift resistance of the panel – slab connectors is ignored in design, any vertical load capacity they have will further increase the shear load transferred through the panel – panel connectors, causing them fail earlier than expected. Also if rocking does occur the vertical damage may decrease the shear carrying capacity of the panel – slab connectors. The inelastic response of the panel – slab connector and the interactions between vertical damage and horizontal response properties are key elements to the overall system response and therefore must be determined. This study seeks to experimentally determine the detailed response of the connectors. This was done by first obtaining the vertical uplift response since previous testing conducted on tilt-up connectors only focused on the horizontal shear response as well as the horizontal “tension” pullout. Next a series of test were conducted to determine the horizontal shear response at various levels of vertical damage ranging from no vertical damage to damage levels approaching failure. This allowed for detailed interaction relationships to be determined between the vertical damage level and the horizontal shear response properties, including horizontal strength, stiffness and displacement capacity. This connector response data was then used in a pushover model to predict multi-panel system responses for solid panel systems using connection configurations commonly used in industry. These responses are studied to compare the predicted levels of seismic ductility and strength achieved using the pushover model to values designers are expecting to achieve using current design techniques. It also allows for the influence the system connection configurations have on the response properties to be studied. Although further research is required which includes panels with openings, and out of plane influences, the information gained in this study is used to suggest ways to improve the efficiency of the system using current connectors, as well as suggest properties which new connectors could posses to create a more ideal system response.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Devine, Frank Joseph

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/12626

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Devine, Frank Joseph. Investigation of the in plane seismic response of solid tilt-up wall systems. master's thesis, University of British Columbia, 2009. http://hdl.handle.net/2429/12626