Back to search

University of British Columbia

Smooth trajectory generation and precision control of 5-axis CNC machine tools

Abstract

dc:description

This thesis presents experimentally verified optimal feedrate generation and high performance precision control algorithms developed for 5-axis machine tools. A feedrate scheduling algorithm has been introduced to minimize the cycle time for 5-axis machining of curved tool-paths. The variation of the feed along the tool-path is expressed in a cubic B-spline form as a function of the arc displacement. The velocity, acceleration and jerk limits of the five axis drives are considered in finding the most optimal feed along the tool-path to ensure smooth and linear operation of the servo drives with minimal tracking error. Improvement in the productivity and linear operation of the drives are demonstrated through 5-axis experiments. In an effort to design an accurate contour controller, analytical models are developed to estimate the contour errors during simultaneous 5-axis machining. Two types of contouring errors are defined by considering the normal deviation of tool tip from the reference path, and the normal deviation of the tool axis orientation from the reference orientation trajectory. A novel multi-input-multi-output sliding mode controller is introduced to directly minimize the tool tip and tool orientation errors, i.e. the contouring errors, along the 5-axis tool-paths. The stability of the control scheme is proven analytically, and the effectiveness of this new control strategy has been demonstrated experimentally. An identification technique for identifying the closed loop transfer function of machine tool feed drives has been introduced. The drive system is identified in closed loop, including the feed drive mechanism, motor amplifier, and the control law. A short Numerical Control Program is used for exciting the axis dynamics without interfering with the servo control loop. A generalized drive model is utilized to capture the key dynamics of the drive systems, while guaranteeing the stability of the identified model dynamics by solving a constrained optimization problem. Methods developed in this thesis have been evaluated on a table tilting 5-axis machining center. Their application to other 5-axis machines would require modeling of the kinematic chain and the drive dynamics to be considered in the control law design and trajectory generation.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sencer, Burak

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/14084

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Sencer, Burak. Smooth trajectory generation and precision control of 5-axis CNC machine tools. doctoral thesis, University of British Columbia, 2009. http://hdl.handle.net/2429/14084