Back to search

University of British Columbia

Moment resistant connections made with timber rivets in wood product substrates

Abstract

dc:description

The moment resistance is determined for connections made with timber (glulam) rivets. Designing a moment connection in wood and wood products is complicated by their non-linear (limited elastic) and anisotropic properties; there is currently no codified design guidance for moment connections in wood or wood products. Timber rivets are high-strength engineered nails. They are used in conjunction with predrilled steel side-plates. The wood product substrates investigated herein are glue-laminated, laminated-strand, laminated-veneer and parallel-strand lumber. The model is based on the principle of equilibrium and assumes that the connection will behave in a ductile - no sudden wood failure - manner. The moments within a connection (a group of fasteners) is summed about an instantaneous centre of rotation. The internal moment arises from the resistance of each fastener; this resistance is non-linear and displacement dependent; a Foschi-style load-slip equation and parameters are used to calculate this for each fastener. The external moment arises from the eccentrically applied load and its radius from the instantaneous centre of rotation; the general, a-priori loading can be converted into a wrench to find this eccentric load and lever arm. The instantaneous centre of rotation that minimizes the difference between the internal and external moments is found by an incremental search. MS Visual Basic was used to implement this search. The instantaneous centre of rotation, and subsequent moment capacity, was found for every degree of preset rotation up to an ultimate capacity. This was implemented for various arrangements of timber rivets and wood products. Experimental verification o f the model for these arrangements indicated the following: the ultimate was almost exactly predicted on average, and the yield loads and the rotational stiffness were under predicted by an average of about 10% and 30%, respectively. The instantaneous centre of rotation appeared in the predicted location. All of the specimens exhibited ductile behaviour during testing, but the side plate completely disengaged on the shortest-rivet laminated-strand and parallel-strand lumber samples. Further research is suggested in several areas: notably, the dynamic response of moment connections and linking the fastener's capacities to more fundamental properties like elastic-moduli and densities.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2003

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Hampson, Joel Alexander

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/14472

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Hampson, Joel Alexander. Moment resistant connections made with timber rivets in wood product substrates. master's thesis, University of British Columbia, 2003. http://hdl.handle.net/2429/14472