Back to search

University of British Columbia

Conceptual design of reflector structure for the large adaptive reflector

Abstract

dc:description

The Large Adaptive Reflector (LAR) is a very large radio telescope proposed by the Dominion Radio and Astrophysical Observatory in Penticton, B C . Two innovative components make the L A R unique from traditional radio telescopes. Firstly, the focal receiver is supported by an airborne helium balloon. The position of the focal receiver is controlled by multiple tethers running to the ground. Secondly, the ground-based reflector structure is "adaptive" in nature, which allows it to be configured in a continuous range of parabolic shapes. The reflector structure is required to be 300m in diameter, with a surface height range of 0 to 15 meters above a level reference plane. The reflector surface must be accurate to within 9mm rms from the ideal paraboloid shapes. The realistic design of the reflector structure with emphasis on fabrication and economy is the focus of this paper. The driving factor in the conceptual design is minimizing the cost per unit area while meeting the surface accuracy requirements under a wide range of operating conditions. Since an adaptive structure of this magnitude is unprecedented, solutions cannot be easily derived from existing structures. Therefore, the methodology of converging towards a design solution must involve creativity, as well as a systematic way of eliminating less optimal solutions. The approach taken here first defines the load requirements, which are mainly governed by environmental loads such as thermal, wind, and snow loads. Various materials and general structural configurations are then compared for their suitability to this application. Once a preliminary design is developed, an analysis is carried out that gives quantitative results for structural performance. Methods of structural fabrication, and dynamic motion of the structure are also considered.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2003

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Loewen, Nathan

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/14484

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Loewen, Nathan. Conceptual design of reflector structure for the large adaptive reflector. master's thesis, University of British Columbia, 2003. http://hdl.handle.net/2429/14484