Back to search

University of British Columbia

Composite sol-gel process for photocatalytic titanium dioxide

Abstract

dc:description

Photocatalytic TiO₂ decomposes organic and inorganic pollutants upon irradiation with UV light. TiO₂ thin films and powder suspensions are used for purification treatments, but small surface area of TiO₂ films, and difficult filtration of powders are the two major drawbacks in application of photocatalytic TiO₂. The major objective of this work was to develop a novel process to combine the thin film coatings and the fine (sub-micron) powder anatase TiO₂ to provide high photocatalytic efficiency thick films and self-supported membranes. The microstructural properties and photocatalytic efficiency of the developed materials were characterized and compared with that of the conventional TiO₂ coatings and powders. Photocatalytic activity of CSG TiO₂ was measured through the ability to decompose organic compounds (trichloroethane, dioxane, toluene), as well as to destroy bacteria. The major achievement of this work is the development of a process wherein structurally sound, thick films and membranes of CSG anatase photocatalytic TiO₂ can be produced in reproducible way. A novel method for the synthesis of monodispersed anatase TiO₂ microspheres through colloidal precipitation has also been established. The microspheres were used as filler TiO₂ in the composite microstructure, bonded with sol-gel derived TiO₂, to produce the composite sol-gel (CSG) TiO₂. A sol-gel-assisted sintering model for the CSG thick films and self-supported membranes was established and validated by experimental data. The model has the ability to predict the sintering behavior of the CSG- TiO₂, in terms of the reduction of specific surface area versus the time of heating, particularly at the initial and intermediate stages of the sintering.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2004

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Keshmiri, Mehrdad

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/15892

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Keshmiri, Mehrdad. Composite sol-gel process for photocatalytic titanium dioxide. doctoral thesis, University of British Columbia, 2004. http://hdl.handle.net/2429/15892