Back to search

University of British Columbia

Modeling paper machine cross direction slice lip responses close to sheet edges

Abstract

dc:description

The design of paper machine cross directional (CD) control systems is normally based on actuator response models obtained in the centre rather than the machine edges. However process characteristics near the sheet edges are different from those in the centre of the sheet. Even with good CD control, the edge profile often shows the greatest variations from the target level. The application of control algorithms more suited to the centre of the machine reduces controller effectiveness at sheet edges. Control close to the sheet edge is normally carried out using a variety of assumptions concerning the expected response, however, these assumptions are often made for mathematical convenience rather than on the basis of physical principles. This work involves the comparison of edge response of the cross directional slice lip actuators with the response at the centre of the paper machine. The performance of a typical industrial CD actuator centre response model is tested and found to be inadequate when modeling the edge response. A new physical model, using surface wave theory of the slurry is investigated, tested and later modified in an attempt to better model the edge response. The new edge model is found to generate an improved edge response prediction, based on the centre response, but in general will be computationally expensive. Several variants of the proposed model are put to the test and one particular model with a fixed parameter is proposed, based on physical principles to replace the centre model when modeling the edge response of heavy grade papers. The performance of this new model is evaluated and found to be more effective at modeling edge response than the conventional model. In addition, this edge model can be applied in conjunction with typical industrial control software without difficulty. Superposition and linearity in actuator response are successfully evaluated and found to hold for the test responses.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Electrical and Computer Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2005

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Yang, David Wei

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/16407

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Yang, David Wei. Modeling paper machine cross direction slice lip responses close to sheet edges. master's thesis, University of British Columbia, 2005. http://hdl.handle.net/2429/16407