Back to search

University of British Columbia

Finite element modeling of ballscrew feed drive systems for control purposes

Abstract

dc:description

This thesis details a scheme, based on finite element methods, for modeling of the ballscrew drives of Cartesian-configured machine tools. Using this scheme, the structural dynamics of the ballscrew mechanism can be incorporated into the feed drive model, and thereby considered during high-bandwidth controller design, and interactive simulation of feed drive-controller performance in the virtual environment. The finite element method used in this thesis for modeling is a hybrid kind, whereby the more rigid components of the feed drive are modeled as lumped-parameter rigid bodies, while the flexible members, like the ballscrew, are modeled using distributed-parameter structural members. As a result, a feed drive model is developed which both maintains a reasonably low level of complexity while adequately capturing the relevant dynamics needed for controller design and simulation. This scheme also pays close attention to the modeling of the screw-nut interface, because it plays an important role in the functioning of ballscrew drives. Two methods are proposed for deriving the stiffness matrix of this interface - the Rigid Ballscrew Method and the Shape Function Method. The former method is shown to capture interesting dynamics of the interface, while the latter is derived in anticipation of situations where the former may not perform satisfactorily. In order to show the benefits of this modeling scheme, three high-bandwidth controllers are designed. The first controller is designed based on the traditional technique which considers only the rigid-body dynamics of the drive. On the other hand, the second and third controllers are designed considering the rigid-body and structural dynamics information obtained from the proposed modeling scheme. Analyses performed on the three controllers reveal that the two controllers designed based on the proposed scheme outperform that which is designed following the traditional technique. Finally, a simulation strategy is designed which allows the feed drive model, together with its non-linear dynamics to be combined with the controller dynamics and other dynamics of the feed drive system. In order to reduce simulation time, a novel method of performing model reduction based on a Component Mode Synthesis technique combined with Modal Acceleration recovery is described. This method is used to achieve an efficient reduction without compromising relevant dynamic properties of the full model. The potentials of the scheme presented in this thesis are demonstrated partly by experiments conducted on a test bed, and in other cases, by simulations performed on a model generated from the test bed.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2005

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Okwudire, Chinedum

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/16650

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Okwudire, Chinedum. Finite element modeling of ballscrew feed drive systems for control purposes. master's thesis, University of British Columbia, 2005. http://hdl.handle.net/2429/16650