Back to search

University of British Columbia

Application of the dynamic one-dimensional model to pulp and paper mill wastewater clarifiers

Abstract

dc:description

This thesis reports the results of research to calibrate the parameters of the Takacs model for pulp and paper sludge and to identify how the Takacs model works on pulp and paper wastewater clarifiers, as compared with municipal wastewater clarifiers. This research work involved zone settling tests for calibration of the model parameters, pilot scale tests and full scale clarifier simulations. The estimated parameter values for the pulp and paper (P&P) and municipal sludge are summarized in Table 1. Both the pulp and paper primary and secondary sludge can be simulated by the Takacs model under normal operating conditions. [Table 1 Diagram] Four clarifiers at the pulp and paper and municipal wastewater treatment plants were simulated. The results showed that all of the circular clarifiers could be simulated by this model, but the rectangular settling tank of this study required 2 or 3-dimensional modeling for a proper simulation. The waste sludge from both the primary and secondary clarifiers of the pulp and paper mill was about 1% higher in concentration than in the simulated result due to the fact that the sludge hoppers provide a long detention time for sludge thickening. Application of the calibrated Takacs model, however, can be of assistance in the design of new clarifiers. It can also be beneficial in operation assistance and risk management assessment for wastewater treatment plants. However, since the sludge at different treatment plants is specific and unique to each plant, the sludge in different situations may have different characteristics and therefore should be calibrated separately.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2004

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Lo, Ing-Wei

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/16772

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Lo, Ing-Wei. Application of the dynamic one-dimensional model to pulp and paper mill wastewater clarifiers. master's thesis, University of British Columbia, 2004. http://hdl.handle.net/2429/16772