Back to search

University of British Columbia

Combustion of natural gas with entrained diesel in a heavy-duty compression-ignition engine

Abstract

dc:description

High-pressure direct-injection of natural gas for use in compression-ignition engines has been found to reduce emissions without sacrificing performance relative to pure diesel operation. In the present work, prototype ‘co-injectors’ which inject a diesel and natural gas mixture from a single injector were tested in a heavy-duty, 6-cylinder Cummins ISX engine with 5 cylinders disabled. One prototype (‘B’) was tested under low-speed, low-load conditions, to determine the effects of fuel flows and in-cylinder conditions on the combustion characteristics of co-injection. Co-injector B, and a second prototype (Co-injector CS: A variation of Co-injector B which mixes the fuels differently) were tested at three engine modes using two injections per cycle to determine the effect of the duration of the first injection on emissions and combustion characteristics. The performance of the co-injectors was compared to Westport Innovation’s High Pressure Direct Injection (HPDI) J36 injector to determine if co-injection can produce comparable emissions. Single injection tests carried out with Co-injector B at 800 RPM over a range of diesel flows, gas flows, injection pressures, and cylinder temperatures & pressures were used to generate response surfaces for knock intensity, ignition delay, and combustion efficiency. It was found that diesel flow and the cylinder pressure at the time of injection had the largest effect of knock intensity and ignition delay, and that the knock/ignition delay relationship in co-injection is inverse. The double injection tests showed that the difference in diesel distributions within the gas plenums of CS and B results in more diesel being injected during the first injection in CS compared to B, which supports previous results. It was found that short first pulses resulted in the lowest emissions for both co-injectors, and that with low first gas pulse widths the performance of the co-injectors is comparable to that of Westport’s HPDI-J36 injector.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Laforet, Christopher A.

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/17010

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Laforet, Christopher A.. Combustion of natural gas with entrained diesel in a heavy-duty compression-ignition engine. master's thesis, University of British Columbia, 2009. http://hdl.handle.net/2429/17010