Back to search

University of British Columbia

Studies of exfoliated molybdenum disulfide catalyst in hydrocracking and hydroprocessing reactions

Abstract

dc:description

Studies of MoS₂ catalysts have demonstrated a close relationship between catalyst activity in hydroprocessing and the structure of the MoS₂. Most reports have focused on hydrodesulfurization and hydrogenation and some of these remain somewhat controversial. Moreover, the effect of MoS₂ structure on heavy oil hydrocracking has not been well studied. In this work, exfoliated MoS₂ was used to study the catalyst structure-activity relationship in Cold Lake heavy oil hydrocracking and model compound hydroprocessing. The exfoliated MoS₂ is dispersed directly in the oil eliminating the influence of catalyst support, and the laminar structure of exfoliated MoS₂ provides an interesting framework to study the relationship between catalyst activity and structure. In heavy oil hydrocracking at 415°C, exfoliated MoS₂ had similar liquid and coke yields but exhibited a better quality liquid product, especially in asphaltene and microcarbon residue removal, than MoS₂ derived from molybdenum naphthenate (MoNaph). In addition, the feasibility of recycling coke was confirmed as more than 90% of Mo resided in the coke after reaction and the spent catalyst-in-coke was active in Cold Lake heavy oil hydrocracking. The activity of exfoliated MoS₂ for hydroprocessing at 350°C was also determined using various model reactants. The reactants studied were naphthalene for hydrogenation, dibenzothiophene for hydrodesulfurization, quinoline and carbazole for hydrodenitrogenation, and phenol for hydrodeoxygenation. Again, the resulting catalyst activity was compared to MoNaph derived MoS₂. Exfoliated MoS₂ gave better overall hydrodesulfurization and hydrodeoxygenation as compared to MoNaph derived MoS₂. In contrast, MoNaph derived MoS₂ showed higher hydrogenation and hydrodenitrogenation activities. These results were a consequence of the morphological differences between the two catalysts in the model systems. The activity of exfoliated MoS₂ in hydrodesulfurization of dibenzothiophene was further compared to that of crystalline MoS₂, MoNaph, and ammonium heptamolybdate derived MoS₂. The prepared catalysts had significantly different morphologies, as described by the crystallite stack height and slab length. These data were used to estimate the fraction of rim and edge sites in the crystallites. The catalysts’ selectivity for hydrogenolysis and hydrogenation reactions were shown to correlate with the fraction of rim or edge sites. Selectivity for hydrogenolysis increased as the fraction of edge sites increased.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2006

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Tye, Ching Thian

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/18221

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Tye, Ching Thian. Studies of exfoliated molybdenum disulfide catalyst in hydrocracking and hydroprocessing reactions. doctoral thesis, University of British Columbia, 2006. http://hdl.handle.net/2429/18221