Back to search

University of British Columbia

Chatter stability of turning and milling with process damping

Abstract

dc:description

The prediction of chatter instability in machining steel and thermal-resistant alloys at low ‎cutting speeds has been difficult due to unknown process damping contributed by the ‎contact mechanism between tool flank and wavy surface finish. This thesis presents ‎modeling and measurement of process damping coefficients, and the prediction of chatter ‎stability limits for turning and milling operations at low cutting speeds. ‎ The dynamic cutting forces are separated into regenerative and process damping ‎components. The process damping force is expressed as a product of dynamic cutting ‎force coefficient and the ratio of vibration and cutting velocities. It is demonstrated that ‎the dynamic cutting coefficient itself is strongly affected by flank wear land. In ‎measurement of dynamic cutting forces, the regenerative force is eliminated by keeping ‎the inner and outer waves parallel to each other while the tool is oscillated using a piezo ‎actuator during cutting. ‎ Classical chatter stability laws cannot be used in stability prediction for general turning ‎with tools cutting along non-straight cutting edges; where the direction and magnitude of ‎the dynamic forces become dependent on the depth of cut and feed-rate. A new dynamic ‎cutting force model of regeneration of chip area and process damping, which considers ‎tool nose radius, feed–rate, depth of cut, cutting speed and flank wear is presented. The ‎chatter stability is predicted in the frequency domain using Nyquist stability criterion.‎ The process damping is considered in a new dynamic milling model for tools having ‎rotating but asymmetric dynamics. The flexibility of the workpiece is studied in a fixed ‎coordinate system but the flexibility of the tool is studied in a rotating coordinate system. ‎The periodic directional coefficients are averaged, and the stability of the dynamic ‎milling system is determined in the frequency domain using Nyquist stability criterion. ‎ The experimentally proven, proposed stability models are able to predict the critical ‎depth of cut at both low and high cutting speeds.‎

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Eynian, Mahdi

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/19234

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Eynian, Mahdi. Chatter stability of turning and milling with process damping. doctoral thesis, University of British Columbia, 2010. http://hdl.handle.net/2429/19234