Back to search

University of British Columbia

The damping of surface water waves in containers with grooved surfaces

Abstract

dc:description

The damping, of surface waves on shallow water can be affected by the roughness of the container walls as well as by surfactant layers present on the air-water interface. The increase in the damping caused by a grooved wave tank base has been studied both theoretically and experimentally. In any experimental investigation into the effect of surface roughness on the damping, surfactants can obscure the effects of wall roughness. An experimental technique is described to enable the relative importance of these two effects to be determined unambiguously. Initially experiments were conducted with the groove amplitude much smaller than the viscous boundary layer thickness. It was found that the increase in the damping caused by the grooved base was small (< 5% increase). The damping has also been studied for large amplitude grooves on the base of the wave tank (dimensions much larger than the viscous boundary layer thickness). It is shown theoretically that, for grooves of triangular or approximately sinusoidal cross section, the damping is increased by an amount proportional to the total surface area of the grooved surface, and is independent of the direction of flow with respect to the grooves. The theoretical model applies when the groove spacing and amplitude are small compared to the fluid depth and wavelength of the surface waves, but are large compared to the viscous boundary layer thickness. Experiments were conducted to test these predictions. By carrying out observations on two surface modes, it is shown that the observed increased damping is due to the grooved surface alone and cannot be attributed to spurious surfactant effects. It was found experimentally that the damping was independent of flow direction with respect to the grooves, and the increase in the damping was strictly proportional to the fractional increase in the area of the base, in complete agreement with the theoretical predictions.

Degree

thesis:*
Name thesis:degree_name
Master of Science - MSc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Physics
Grantor dc:publisher
University of British Columbia
Year dc:date
1975

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Gettel, Lorne Edward

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/19365

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Gettel, Lorne Edward. The damping of surface water waves in containers with grooved surfaces. master's thesis, University of British Columbia, 1975. http://hdl.handle.net/2429/19365