Back to search

University of British Columbia

A parallelogram chain designed to measure human joint motion

Abstract

dc:description

This work is concerned with the problem of measuring the motion of a human joint under dynamic conditions. Past and present solutions to this problem are examined in a literature search. Criteria are established for the evaluation of designs, based on one year's clinical experience with a locally built device. A parallelogram chain is chosen from generated design alternatives using the established evaluation criteria. A prototype of the parallelogram chain is built. The chain casting has thin flexible plastic hinges. As each parallelogram scissors, unwanted translations are absorbed while three mutually perpendicular rotations pass through the chain unchanged. This allows the potentiometer motica transducers to be self-aligning with a joint. This will reduce patient fitting time and increase the reproduceability of results compared to previous devices. The chain is applicable to any large joint of the upper or lower limbs. A test rig, simulating human joint motion, is built. Test results indicate that the parallelogram chain can record dynamic motions of walking and slow running. The chain has a definable working volume within which low error and reproduceable results can be obtained. The chain produced best results, comparable or better than those obtained by other workers, when only one of the three measuring potentiometers was aligned with the corresponding joint axis of rotation. Errors caused by the joint simulator are explained and will facilitate redesign. The main source of measurement error is the hinge geometry and not the material properties of the chain. As a result, a new chain design is presented that should give reduced measurement errors.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1975

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Cousins, Steven J.

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/19368

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Cousins, Steven J.. A parallelogram chain designed to measure human joint motion. master's thesis, University of British Columbia, 1975. http://hdl.handle.net/2429/19368