Back to search

University of British Columbia

Viscoelastic effects in boundary lubrication

Abstract

dc:description

The static friction of steel under boundary lubricated conditions was investigated both experimentally and theoretically. The theoretical model was developed using the assumption that during the application of a tangential load to a friction couple, the real area of contact grows in a viscoelastic manner until a critical shear stress is reached. Using this model, it was possible to distinguish the effect of static and dynamic contact time on area growth and thus to show why the traditional "time dependence of static friction" theories have limited validity. The model predicts that µs, the static friction coefficient, is a function of the rate parameter θ, and that a relaxation time can be assigned to a given interface. Subsequent experimental work using steel surfaces in vacuum as well as steel surfaces lubricated by various surface films showed that surface conditions play a large role in determining the exact µs - θ relationship for a given friction couple. Over the range of θ investigated the static friction coefficient of steel is constant if certain surface films are present; for other films the static friction coefficient vs θ curve shows an upper and lower asymptote. In the latter case a relaxation time was assigned to each boundary lubricant. For given asymptotes these relaxation times can be used to predict whether the film will be a useful lubricant at a particular θ. A subsequent investigation showed that the relaxation times are strongly affected by temperature. Since raising the substratum temperature results in smaller relaxation times, it is obvious that a particular lubricant may become ineffective as the substratum temperature changes. Both the experimental and theoretical work clearly demonstrate that the static friction of steel can be significantly modified by the application of appropriate boundary lubricants.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1974

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Green, Marjorie Ann Carlson

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/19678

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Green, Marjorie Ann Carlson. Viscoelastic effects in boundary lubrication. doctoral thesis, University of British Columbia, 1974. http://hdl.handle.net/2429/19678