Back to search

University of British Columbia

A new slotted-wall method for producing low boundary corrections in two-dimensional airfoil testing

Abstract

dc:description

This thesis deals with a new approach to reducing windtunnel wall corrections in airfoil testing, by employing a transversely-slotted wall opposite the suction side of the airfoil, and a solid wall opposite the pressure side. The solid elements of the slotted wail are symmetrical airfoils at zero incidence. This geometry permits the flow to assume closely the streamline pattern for unconfined flow, without degrading the flow quality through shear layer mixing near the test airfoil. The theory uses the potential flow surface source-element method, with Kutta conditions satisfied on the test airfoil and the wall slats. In experiments using a range of sizes of airfoils of three different profiles, good agreement with the predictions of the theory has been obtained. It appears that uncorrected lift coefficients and pressure distributions, accurate to within one percent, can be obtained for a wide range of airfoil shapes, sizes, and lift coefficients, using a slotted wall of open-area ratio between 60 and 70 percent.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1975

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Williams, Christopher Dwight

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/19742

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Williams, Christopher Dwight. A new slotted-wall method for producing low boundary corrections in two-dimensional airfoil testing. doctoral thesis, University of British Columbia, 1975. http://hdl.handle.net/2429/19742