Back to search

University of British Columbia

Aerosol collection in granular beds

Abstract

dc:description

The filtration of aerosols using granular beds was studied to determine the feasibility of using such devices as high efficiency particle collectors. Based on the experimental data, it was attempted to derive expressions for predicting the aerosol removal efficiency of the granular bed. Granular beds composed of fairly uniform, spherical nickel shot were employed in a 7.4 cm diameter copper column to collect solid, monodispersed, polystyrene latex aerosols. The collection efficiency of the granular bed was determined as a function of several variables, viz., aerosol diameter (0.109 to 2.02 urn); bed particle diameter (100 to 600 μm); bed depth (0.3 to 19 cm); superficial gas velocity (5 to 67 cm/sec); and flow direction (upflow and downflow). The monodispersed, latex aerosols were generated by atomizing dilute hydrosols of aerosol particles. The aerosol number concentrations were measured at the inlet and outlet of the granular bed (using light scattering techniques), from which the bed collection efficiency was determined. Using the concept of an isolated bed particle it was possible to quantitatively predict the collection efficiency of the bed. The collection of an aerosol by an isolated bed particle can be attributed to the following mechanisms:- inertial impaction, direct interception, diffusional deposition, gravitational deposition and electrostatic effects. In the present study electrostatic effects were eliminated by grounding the equipment and neutralizing the aerosol. Equations based on individual collection mechanisms and combinations were fitted to the experimental data by multiple regression analysis. An empirical model was developed, which gave good predictions of the experimental bed collection efficiency. The single collector efficiency (EB) was calculated using the following empirical equation: EB = 1.0 St + 150,000 NR[sup 4/3] Pe[sup -2/3] + 1.5 NG and the overall bed collection efficiency (EBT) was calculated using the following theoretical equation: [equation not included]. The difference between the experimental and calculated bed efficiencies were generally less than ten percentage points. Experimental results indicate that high collection efficiencies can be achieved with relatively shallow fixed beds of granular material. Inertial impaction was considered to be the dominant collection mechanism at high gas velocities, whilst diffusion and, to a lesser extent, gravity were considered dominant at low gas velocities. For all the experimental conditions studied, interception was shown to be insignificant.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1978

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kennard, Malcolm L.

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/21154

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Kennard, Malcolm L.. Aerosol collection in granular beds. master's thesis, University of British Columbia, 1978. http://hdl.handle.net/2429/21154