Back to search

University of British Columbia

Feasibility of the piezoelectric exploration technique for quartz vein detection

Abstract

dc:description

The piezoelectric effect of quartz rich rock has been investigated both in the laboratory and a subterranean environment. In the laboratory experiment, rock specimens from the Con Mine, Northwest Territories, were examined for crystal alignment and cut into oriented 3.81 cm (1.5 in) sided cubes. The specimens were clamped, together with the measuring electrodes, between parallel plates of a compression cage designed to apply a consistent and uniform pressure distribution across the samples. A solenoid device applied a stress pulse of highly repeatable amplitude and form to the specimen and an instrumentation amplifier measured the differential piezoelectric voltage between opposite faces of the specimen. The massive samples with random fabrics were expected to yield a net "statistical effect". The measured voltage variations between orthogonal directions were attributed to signal domination by large crystals within the matrix, limited sample volume, microfracturing, and the distribution of non-piezoelectric mineral components within the matrixes of some specimens. The greatest piezoelectric responses were obtained from samples containing large crystals in their matrix. The cubic aggregates which clearly exhibited quartz crystal alignment displayed the theoretically predicted minimum piezoelectric response parallel to the preferred crystal elongation direction. The specimens exhibiting greatest alignment produced the largest piezoelectric responses. The limited experimental evidence indicated that the signal magnitude was also proportional to quartz content and crystal size. Underground trials of two exploration systems were conducted at the Con Mine In the first trial, during periods of low industrial electrical interference, clear piezoelectric signals were observed for source-target distances as large as 55 m and electrode-target distances out to 20 m. Piezoelectric signals were generated by impact of both compressional and shear seismic waves with the exposed quartz vein. While this exploration system operated quite effectively during periods of low electrical noise, a superior filter system was required for the normal conditions. For the second fields test, a more portable, DC powered, instrumentation amplifier with an extensive filter system was designed. Despite the improved filtering, noise levels were significantly higher during this trial and beyond 10 m the initial arrival of the piezoelectric signal was obscured.

Degree

thesis:*
Name thesis:degree_name
Master of Science - MSc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Geophysics
Grantor dc:publisher
University of British Columbia
Year dc:date
1979

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Jose, Barrie Frederick

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/21377

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Jose, Barrie Frederick. Feasibility of the piezoelectric exploration technique for quartz vein detection. master's thesis, University of British Columbia, 1979. http://hdl.handle.net/2429/21377