Back to search

University of British Columbia

Preparation and properties of reactively sputtered copper oxide films

Abstract

dc:description

The deposition of thin copper oxide films by reactive sputtering has been investigated from both experimental and theoretical standpoints. Experimental work utilized both r.f. and d.c. sputtering in argon/oxygen mixtures. The film properties of [O]/[Cu] compositional ratio, optical constants and resistivity were experimentally determined. The composition of the films was found to change with increasing oxygen partial pressure in the following manner Cu → Cu + Cu₂O →Cu₂O →Cu₂O + CuO → CuO The above trend could also be observed at a given oxygen partial pressure by varying the metal deposition rate. This observation led to the postulate that the film compositional ratio was determined by the relative magnitudes of the fluxes of copper and oxygen atoms incident on the substrate plane. Based on this postulate a comprehensive theory describing film deposition by reactive sputtering was developed. The theory is sufficiently general to apply to any metal - elemental reactive gas system. Good agreement was obtained between the predictions of the theory and the phase composition of copper oxide films deposited over a wide range of experimental conditions. Correlation of theoretical and practical data also allowed determination of the sticking coefficient for oxygen on copper-coated surfaces. The theory also served to guide experiments in producing, in a very reproducible manner, copper oxide films with a wide range of optical and electrical properties. The optical constants of complex refractive index and absorption coefficient were determined for the first time for reactively-sputtered films of Cu + Cu₂O, Cu₂O, Cu₂O + CuO and CuO. The presence of Cu₂O was found to be characterized by a peak in the real part of the refractive index (n = 3.36) occurring at a wavelength of 0.48 μm. Evidence of free carrier absorption and acceptor level - conduction band transitions was obtained for (Cu₂O films of various stochiometry. The resistivity of the Cu₂O films depended strongly on the stochiometry and values as low as 30 ohm cm could be easily obtained. Such low values of resistivity are not readily obtainable by other preparative techniques and allow Cu₂O to be considered as a semiconductor material for a variety of applications. One such application, namely Cu₂O/Si heterojunction solar cells, was investigated in the present work.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Electrical and Computer Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1978

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Drobny, Vladimir F.

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/21510

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Drobny, Vladimir F.. Preparation and properties of reactively sputtered copper oxide films. doctoral thesis, University of British Columbia, 1978. http://hdl.handle.net/2429/21510