Back to search

University of British Columbia

Case study of spray design for a continuous billet caster

Abstract

dc:description

The spray cooling system of an operating billet caster has been redesigned with the aim of reducing the formation of mid-way cracks. These cracks are caused by tensile strain which is generated at the solidification front when the surface temperature of the strand rebounds owing to a sharp reduction in surface heat extraction. The objective of the design, therefore, was to achieve a cooling system that would minimize surface temperature rebound of the strand as it passes from one cooling zone to the next. A computer program based on the explicit finite difference method has been used for the design work. The spray design was implemented on one strand of an operating continuous casting machine which produced 10.8 cm square billets. Transverse sections were cut from the test strand and sulfur printed, then compared to sulfur prints of sections taken from an adjacent strand of the same heat but with unmodified sprays. It was shown that with empirical adjustment, the redesigned spray system reduced the severity of mid-way cracks in over 80% of the heats. It was also found that the carbon content and cast structure have a profound effect on the cracking tendency, whereas, the Mn/S ratio (up to 30%) is less effective. Finally, a new design method for sprays has been proposed which may result in a better temperature distribution and may be easier to adjust to suit specific operating conditions.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1979

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Agarwal, Prakash K.

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/22243

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Agarwal, Prakash K.. Case study of spray design for a continuous billet caster. master's thesis, University of British Columbia, 1979. http://hdl.handle.net/2429/22243