Back to search

University of British Columbia

Three dimensional heat flow in the direct chill casting of non-ferrous metals

Abstract

dc:description

A three dimensional mathematical model has been developed to study heat flow and solidification in the Direct Chill casting of non-ferrous metals with rectangular as well as irregular cross-sections. The model which is based on an alternating direction, implicit finite-difference numerical method is capable of simulating heat flow both in the steady state and transient part of the casting operation. The validity of the model has been verified by comparing predicted pool profiles and pool depths with industrial measurements. The model has been used to study the importance of heat flows in the various directions, and the limitations of using two-dimensional heat flow models are brought out. This study has shown that a two-dimensional model which neglects heat flow normal to the narrow face can be used to simulate the solidification of slabs with aspect ratios greater than 2.5, cast under conditions of conventional D.C. cooling. Further it was demonstrated that with reduced secondary cooling, a two-dimensional model that neglects axial heat conduction is preferable. Model calculations show that in cooling large sections the unsteady state can occupy around 25% of the total casting cycle. The formation of cracks in jumbo ingots of Prime Western Grade zinc has been investigated with the aid of the mathematical model. It has been shown that the cracking is caused by reheating of the surface below the spray cooling zone, if this zone is short and characterized by a high water flux. The surface reheating generates tensile strains at the solidification front where cracking is aided by the presence of lead rich liquid in the inter-dendritic regions. A new spray assembly has been designed which attempts to cool the casting more uniformly from, the top of the mould to the bottom of the liquid pool. This new spray system has been tested in-plant for casting Prime Western Grade zinc and results have proven its effectiveness in preventing crack formation.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1980

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Venkateswaran, V.

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/22390

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Venkateswaran, V.. Three dimensional heat flow in the direct chill casting of non-ferrous metals. doctoral thesis, University of British Columbia, 1980. http://hdl.handle.net/2429/22390