Back to search

University of British Columbia

A non linear incremental finite element program for the analysis of shafts and tunnels in oilsands

Abstract

dc:description

A method for analysing the deformation behaviour of oilsand adjacent to shafts and tunnels is presented. Oilsand is comprised of a dense sand matrix with its pore spaces filled with bitumen, water and free or dissolved gases. The Engineering behaviour of oilsand is governed by the stresses in the sand matrix. The bitumen does not contribute directly to the strength of the sand. However, indirectly the presence of bitumen may greatly affect its behaviour. This is because the presence of bitumen reduces the effective permeability of the oilsand and very often undrained conditions occur. Then the pressure of the pore gases remain high reducing the effective stresses for unloading conditions. A nonlinear incremental finite element model is used to analyse the oilsand skeleton behaviour. Dilation or shear induced volume change is an important characteristic of a dense sand and this is included in the analysis using a modified form of Rowe's stress dilatancy theory. The unloading condition at the face of a tunnel or shaft can lead to a violation of the failure criterion and this condition is rectified by a stress redistribution technique. The compressibilities of the oil and water phases are neglected in comparison with that of the gas phase and pore pressure changes are predicted by the ideal gas laws. Under undrained conditions the pore pressure is coupled into the skeleton stresses by maintaining volumetric strain compatibility between the skeleton and pore fluid phases. The results have been checked with drained and undrained closed form solutions. The solution for the unloading of a tunnel in oilsand is presented and it shows that the limiting support pressures can be reduced by venting elements to a reasonable distance from the tunnel. It is also found that the effects of shear dilation are significant only when the limiting support pressure is approached.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Civil Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1981

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Gunaratne, Manjriker

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/22791

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Gunaratne, Manjriker. A non linear incremental finite element program for the analysis of shafts and tunnels in oilsands. master's thesis, University of British Columbia, 1981. http://hdl.handle.net/2429/22791