Back to search

University of British Columbia

Optical trapping using a photonic crystal cavity : design and sample fabrication

Abstract

dc:description

A photonic crystal (PC) structure for trapping a 50nm radius dielectric particle at a precise location on a silicon surface in an organic solvent environment has been designed and all of its key components have been fabricated. The high gradient of electric field intensity in a PC cavity mode, with wavelength ~ 1.5 microns, exerts a radiation force toward the center of the cavity. The Finite Difference Time Domain (FDTD) modeling method was used to design a symmetric (input/output) structure that consists of two grating couplers, two parabolic tapered waveguides, two single mode ridge waveguides, two photonic crystal waveguides and a single three-missing-hole (L3) PC cavity. The radiation force on the dielectric sphere was exactly calculated using FDTD simulations to evaluate the Maxwell Stress Tensor (MST) in the presence of the particle to be trapped. This result was compared to that obtained using the simpler dipole approximation, and good agreement between them was found. The fabrication of the structure was done by electron beam lithography and chlorine plasma etching. The Q factors for some of the fabricated samples were measured from the cavity enhanced photoluminescence emission of PbSe quantum dots deposited on the sample surface. A vertical Q factor of 3600 (in vacuum environment) was measured for an isolated cavity, which corresponds to a Qv of 3800 ( in solvent environment) in the FDTD simulations. Also, the Q, of the overall structure (cavity and the waveguides) was measure to be 1050 in vacuum, which from simulations is equivalent to a Q of 1800 in a solvent. These Q values and the resonant frequencies of the modes are in close, but not perfect agreement with the simulation results.

Degree

thesis:*
Name thesis:degree_name
Master of Science - MSc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Physics
Grantor dc:publisher
University of British Columbia
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mirsadeghi, Seyed Hamed

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/23738

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Mirsadeghi, Seyed Hamed. Optical trapping using a photonic crystal cavity : design and sample fabrication. master's thesis, University of British Columbia, 2010. http://hdl.handle.net/2429/23738