Back to search

University of British Columbia

Mathematical modelling of the unbending of continuously cast steel slabs

Abstract

dc:description

A two-dimensional, elasto-plastic, finite-element model has been developed to calculate the bending and bulging deformation of a partially solidified continuously cast steel slab during straightening on a curved-mould casting machine. A preliminary, three-dimensional elastic analysis revealed that a two-dimensional plane-stress model is sufficient for the calculations. The effects of solid-shell motion have been considered in part by shifting the roll points in two steps. The model was checked by comparing predictions of internal cracks with plant data. From the results of calculations of a one-point bending bow-type caster (10.5 m radius) for casting speeds of 1.0, 1.2 and 1.6 m/min, it has been verified that internal cracks appear at the solidification front in the upper shell due to straightening of the strand at the higher casting speeds. The critical strain for internal cracks was taken to be 0.25-0.3% at a strain rate of 1x10⁻⁴ s⁻¹ for low-carbon steels. It has been found that the upper and lower shells deform separately around their individual neutral axes, which are shifted to within 15 mm of the respective solidification fronts by the roll-friction force. Therefore the bending strain, ε[sub u],in the low-ductility region close to the solidification front can be very small, lower by about 0.3% than the value predicted by one neutral-axis theory. However, as a result of the interaction with the bulging strain, ε[sub B], the resultant total strain, ε[sub T], becomes large enough to cause internal cracks(radial streaks) close to the solidification front of the upper shell. The correlation among these variables is as follows; ε[sub T] = (2-5) ε[sub B] + ε[sub u]. Thus, the bulging strain affects the total strain significantly; and to prevent internal cracks it is important to suppress the bulging by having low surface temperatures and small roll pitches during straightening. By comparing machine radii of 8 m, 10.5 m and 13 m for a one-point bending bow-type caster, it has been verified that the small machine radius of 8.0 m is unfavorable because at normal casting speeds the tensile strain at the solidification front exceeds the critical value for crack formation.

Degree

thesis:*
Name thesis:degree_name
Master of Science - MSc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Metals and Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1983

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Uehara, Masatsugu

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/24054

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Uehara, Masatsugu. Mathematical modelling of the unbending of continuously cast steel slabs. master's thesis, University of British Columbia, 1983. http://hdl.handle.net/2429/24054