Back to search

University of British Columbia

Stresses and vibrations in bandsaw blades

Abstract

dc:description

Due to rising lumber costs it has become more and more important to optimize the cutting performance of bandsaws as they are used in the forest products industry. One important aim is to reduce the lateral and torsional deflections of the blade to minimize the thickness of the cut. This study tries to assess the influence of various typical bandsaw parameters on the stress distribution in the bandsaw blade and on the vibrational behaviour of the stationary and the running sawblade. Experiments were performed with a fullsize industrial production bandsaw. The experimental results for the stress-strain measurements of the stationary sawblade are compared with results from theoretical solutions. Vibration measurements of the stationary and of the running blade are compared to values derived from MOTE'S [9] flexible band solution and KANAUCHI'S solution [21] for lateral deflection and with ALSPAUGH'S [2] solution for torsional vibrations. The results presented show that the static stress measurements agree very well with the analytically predicted results. Major factors influencing the stress distribution in the blade: the axial prestress, stresses due to bending of the blade over the bandsaw wheels, and stresses due to tilting of the top bandsaw wheel were examined. A comparison of the experimental and analytical results of the vibration measurements for the stationary sawblade showed very good agreement for the lateral natural frequencies, while the torsional natural frequencies were considerably higher than the analytically predicted values. Similar results could be observed for the natural frequencies of the running blade. The mode shapes of the stationary sawblade at the natural frequencies were measured. It was found that the modeshapes consisted of coupled modes for most tiltstress differences.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1982

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Eschler, Andreas

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/24073

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Eschler, Andreas. Stresses and vibrations in bandsaw blades. master's thesis, University of British Columbia, 1982. http://hdl.handle.net/2429/24073