Back to search

University of British Columbia

Aspects of mould design in electroslag casting

Abstract

dc:description

Electroslag casting is a process technique used to produce castings using electroslag melting. It is likely that channel cooled Aluminium moulds will be employed. Thus, the criteria for the design of moulds to be used in this process were examined. Temperatures in a mould section were measured and compared to those calculated from a model developed assuming 3-D quasi steady state heat flow and reasonable agreement was found. In the model the two major boundary conditions are the heat transfer coefficient to the coolant and the heat flux on the hot face. The former can be estimated from established correlations for heat transfer in tubes such as the Petukhov and the Sieder-Tate relations. The latter had to be measured and a heat flux sensor was developed for this. Proposals were made to qualitatively explain the heat flux variation along the mould height, but it was not possible to estimate the heat flux for a casting of arbitrary shape in a simple manner. According to the slag crystallisation mechanism proposed the influence of mould on the surface quality of the casting was found to be negligible.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Metals and Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1983

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sathaye, Jayant Moreshwar

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/24094

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Sathaye, Jayant Moreshwar. Aspects of mould design in electroslag casting. master's thesis, University of British Columbia, 1983. http://hdl.handle.net/2429/24094