Back to search

University of British Columbia

CFD simulation of aerosol flow and hydrocarbon fouling on a circular disk

Abstract

dc:description

Coking is one of the key technologies used in upgrading of oil sands bitumen. In coking units, the bitumen is thermally cracked in the presence of steam to produce valuable lighter species and by-product solid coke. Hot vapours which contain these valuable species from the fluid coker pass through cyclones before entering the scrubber section of the coker, so that coke and heavy droplets are removed. However, some micron-sized heavy hydrocarbon droplets are not removed in the cyclones and enter the scrubber grid packing. These droplets can deposit on the scrubber grid and react over time to form coke as a result of high temperatures. A model is developed for calculation of deposition from a droplet-gas mixture at similar conditions. A simple geometry of a circular disk was used to be able to evaluate the validity of model at different conditions. The model combined Computational Fluid Dynamics (CFD) for calculating the flow hydrodynamics and droplet transport to the surface, and HYSYS simulation for prediction of mixture phase equilibrium at different temperatures. Effects of parameters such as droplet size and gas velocity were studied. Based on modeling results, Stokes number seemed to be a very important parameter on deposition of droplets. At low Stokes number, the main mechanism for deposition was molecular and eddy diffusion, and deposition did not change very much with change in droplet size and velocity. At higher Stokes number impaction was the main mechanism, and the deposition rates increased with increases in droplet size and gas velocity. The effect of surface properties on deposition was also studied. For the applied conditions and surfaces the perfect sticking assumption was considered satisfactory. Calculations suggested that application of hydrophobic material might help to decrease deposition by increasing the possibility of rebounding for droplets. Model was tested against room-temperature data for air-droplet systems and hot-unit experiments with heavy hydrocarbons carried out in parallel with the modeling work. For the latter, increases in the temperature decreased the deposition rates both by decreasing the droplet concentration and by the evaporation of volatiles formed in coking reaction. Finally, the model showed good ability in the prediction of deposition rates at different conditions.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Lakghomi, Babak

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/24216

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Lakghomi, Babak. CFD simulation of aerosol flow and hydrocarbon fouling on a circular disk. master's thesis, University of British Columbia, 2009. http://hdl.handle.net/2429/24216