Back to search

University of British Columbia

Heat transfer and pressure drop in fixed beds of wood chips

Abstract

dc:description

Heat transfer from a flowing gas to a fixed bed of dried Dougas-fir wood chips has been studied by a transient method. Hot air at about 130°C flowed upward through 0.2 m dia x 1 m deep beds of commercially prepared wood chips which had been screened for thickness. Four different wood chip sizes were used, which varied in mean thickness from 2.44 to 7.26 mm. The thickest chips were 18.4 mm wide x 36.3 mm long. Gas temperatures were measured at a number of axial positions as the bed temperature rose from its initial temperature of about 20°C. Heat transfer coefficients were calculated by fitting the air temperature profiles to a transient mathemical model for plug flow of gas through a bed of slab-shaped particles with finite internal thermal resistance. The heat transfer model was solved analytically using an approach pioneered by Amundson (10) for fixed beds of spherical particles and based on Rosen's (6,7) function. This solution has not appeared elsewhere in the literature, and is shown to converge to that of Anzelius (1) if the Biot number for the particle approaches zero. Experiments were done at a series of air velocities with four wood-chip thicknesses and with spherical catalyst particles to provide a check on the technique. The effect on heating rate of 30% by volume steam in the incoming air was investigated. For selected experiments, solid temperatures within the wood chips were measured. A correlation of the heat transfer coefficients is presented. Pressure drop was measured as a function of air velocity for different sizes of wood chips at room temperature and the results are compared with predictions of the Ergun equation.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Chemical and Biological Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1985

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Chow, Bosco

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/25085

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Chow, Bosco. Heat transfer and pressure drop in fixed beds of wood chips. master's thesis, University of British Columbia, 1985. http://hdl.handle.net/2429/25085