University of British Columbia
Fabrication process and characteristics of a silicon strip detector
Abstract
dc:descriptionThe current and possible uses of semiconductor solid state detectors in nuclear physics are briefly discussed. The theory of solid state detectors is discussed with emphasis on the silicon PIN diode detector. A fabrication process for silicon surface barrier position sensitive solid state detectors has been developed at UBC based on the work of J.B.A. England. A fabrication process recipe is included. A prototype surface barrier detector system has been built and tested at UBC and TRIUMF using this process. The device has 1 mm position resolution in one direction, an active area of 40 mm in diameter and a mass thickness of 55 mg/cm². The measured efficiency for 50 MeV pions is 70% and expected rate capability is in excess if 1 MHz per strip. The detector efficiency is limited by a marginal signal-to-noise ratio.
Degree
thesis:*- Name thesis:degree_name
- Master of Applied Science - MASc
- Level thesis:degree_level
- master's
- Discipline thesis:degree_discipline
- Engineering Physics
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 1985
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Mills, David J.
Rights
dc:rights- Statement dc:rights
-
- For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/25120