University of British Columbia
Sputtering and characterizations of titanium oxide films
Abstract
dc:descriptionReactive magnetron sputtering of titanium oxides has been investigated with emphasis on the technique of using a reactive gas baffle to enhance film oxidation. This method consists of placing a partial barrier between the sputtering target and the substrate. For the first time the dependence of the effectiveness of this technique on the material being sputtered has been considered and the effects of various baffles were compared for the same material (TiO[sub x] ,0≤x≤2). Decreasing the transparency of the baffle to sputtered flux resulted in an increase in the maximum attainable oxygen partial pressure for the metallic target condition. However, electrical resistivity data for the sputtered films revealed that film oxidation was not correspondingly enhanced. The structural, electrical and optical properties of the sputtered titanium oxide films were measured.The films were found to be amorphous without discernible microstructure. The visible absorption band in substoichiometric films was found to have its maximum at 880 nm (1.41 eV) and the UV absorption edge was at 335 nm (3.70 eV). Based on reported photoluminescence in polycrystalline films of TiO₂ [39] an attempt was made to observe photoluminescence in amorphous films with negative results.
Degree
thesis:*- Name thesis:degree_name
- Master of Science - MSc
- Level thesis:degree_level
- master's
- Discipline thesis:degree_discipline
- Physics
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 1985
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Burbidge, Douglas S.
Rights
dc:rights- Statement dc:rights
-
- For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/25850