University of British Columbia
Measurement of induction motor speed from induced slip frequency signal
Abstract
dc:descriptionA method to detect the slip of a three-phase or single-phase induction motor and hence determine the motor speed is proposed. A pick-up coil is placed in close proximity to the motor and by suitable amplification and filtering of the weak slip frequency signal, the slip frequency signal component is isolated for the speed measurement. No device needs to be attached to the motor shaft. Experimental results from four test induction motors show that the proposed method of speed measurement is fully feasible and applies to normal loads, i.e., for slip less than 13% with considerable accuracy. Therefore, even the speed of sealed induction motor such as those used in refrigerators can be easily measured.
Degree
thesis:*- Name thesis:degree_name
- Master of Applied Science - MASc
- Level thesis:degree_level
- master's
- Discipline thesis:degree_discipline
- Electrical and Computer Engineering
- Grantor dc:publisher
- University of British Columbia
- Year dc:date
- 1985
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Cai, Ji-Yuan
Rights
dc:rights- Statement dc:rights
-
- For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
- Language dc:language
- eng
Identifiers
dc:identifier.*- Handle dc:identifier
- http://hdl.handle.net/2429/26219