Back to search

University of British Columbia

Computer-aided rolling of parts with variable rectangular cross-section

Abstract

dc:description

A computer-aided process planning scheme for flat rolling of symmetric parts with variable rectangular cross-section is proposed. As a starting point, El-Kalay and Sparling's formula for spread was found to be suitable for this application and thus was used in developing the method. Two distinct criteria were considered in the analysis, namely: kinematic and dynamic constraints. In order to control the precision of the rolled parts, provisions were made for specifying the tolerances of the finishing passes in the form of convexity constraints. Numerical formulation was used and the resulting non-linear equations were solved by an iterative method. Based on the process constraints and the numerical solution, a computer algorithm was then developed to determine the number of rolling passes required, as well as the dynamic variation of the roll gap as a function of the rolled length. Preliminary laboratory experiments were then conducted to verify the validity of the predicted results and the applicability of the spread formula in determining the process behaviour. These experiments led to the modification of the spread formula. Using the modified formula it was found that a good agreement existed between the predicted results and those of the experiments. Operating aspects were also considered. It was proposed that a control system based on the rolled length would be both simple and suitable. It was then concluded that for rectangular parts with moderate variation in shape and reasonable complexity, where formed-die rolling and die-forging are also applicable, this method has considerable advantages as it replaces the forging hardware with the rolling software.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1986

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sepehri, Nariman

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/26327

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Sepehri, Nariman. Computer-aided rolling of parts with variable rectangular cross-section. master's thesis, University of British Columbia, 1986. http://hdl.handle.net/2429/26327