Back to search

University of British Columbia

A study of the manufacturing method and related mechanical properties of SiC reinforced aluminum

Abstract

dc:description

A study involving manufacturing and tensile testing was conducted to elucidate the mechanical properties of a SiC fibre reinforced aluminum. Areas analyzed included production methods, failure mechanisms, tensile behaviour and interfacial bonding. A well dispersed fibre distribution in the as cast composite was difficult to obtain. This arises from the high degree of intermingling of fibres in the as-received tows. The poor distribution can lead to incomplete fibre utilization and increase composite susceptibility to delamination damage. The strength of the composites tested were below that expected from a rule of mixtures (ROM) value. Fibre damage incurred during manufacturing and by the formation of aluminum carbide on the fibre surface are possible causes for this anomaly. Also, fibre/(matrix plastic deformation) interaction can lead to premature composite failure especially at the low volume fractions of fibres being analyzed. On a microscopic level good bonding between the fibre and matrix was observed. This adhesion was attributed to the formation of aluminum carbide at the fibre/matrix interface. Synergistic strengthening of the matrix was observed for several tensile samples. This phenomena may be attributed to fibre distribution altering the aluminum matrix deformation behaviour.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1986

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Wiskel, J. Barry

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/26343

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Wiskel, J. Barry. A study of the manufacturing method and related mechanical properties of SiC reinforced aluminum. master's thesis, University of British Columbia, 1986. http://hdl.handle.net/2429/26343