Back to search

University of British Columbia

GaAs MESFETS and their applications in digital logic and digital to Analog conversion

Abstract

dc:description

The purpose of the work described in this thesis was to study the use of GaAs MESFETs in digital logic and digital to analog conversion. A part of this work was to test ideas by actually fabricating GaAs MESFET devices in our laboratory by implanting Si into LEC SI GaAs. Initially, the Rockwell "ion implanted planar process" was used. With this process high source and drain resistance result when the magnitude of the threshold voltage is reduced. A recessed gate process was then tried in order to reduce the series resistance, but it was difficult to control in order to achieve an acceptable uniformity. Sadler's self-aligned gate technique was then tried but an acceptable yield was found to be hard to achieve. Based on the experience with the above methods, a Self Aligned Gate Technique Using Polyimide (SAGUPI) was developed. Using this technique it was found to be possible to reduce the series resistance of the transistor and achieve acceptable yields and uniformities. The characteristics of devices fabricated using the ion implanted planar process were measured. The transistor I-V characteristic parameters, Schottky and ohmic contact parameters and implanted region parameters were measured at room temperature and as a function of temperature over the range from -80°C to 80°C. It was found that no large change in the speed of the circuit occurs over this range. A new digital logic (the Common Drain FET Logic, CDFL) was developed for the application in Ultra High Speed Very Large Scale of Integration. The performance of the new logic was compared with that of other GaAs MESFET logic using computer simulation. The simulation results showed that the CDFL has potential for meeting the UHS VLSI requirements. Two 3 bit Digital to Analog Converters (DAC) (one with MESFETS as current sources and the other with saturated resistors) were developed. MESFETs gave better current source characteristics than saturated resistors.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy - PhD
Level thesis:degree_level
doctoral
Discipline thesis:degree_discipline
Electrical and Computer Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
1985

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Abdel-Motaleb, Ibrahim Mohamed

Rights

dc:rights
Statement dc:rights
  • For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use.
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/26637

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Abdel-Motaleb, Ibrahim Mohamed. GaAs MESFETS and their applications in digital logic and digital to Analog conversion. doctoral thesis, University of British Columbia, 1985. http://hdl.handle.net/2429/26637