Back to search

University of British Columbia

Thermal modeling validation techniques for thermoset polymer matrix composites

Abstract

dc:description

Process modeling is becoming a widely-accepted tool to reduce the time, cost, and risk in producing increasingly large and complicated composite structures. Process modeling reduces the need for physical parts, as it is not practical or economical to design and fabricate large composite structures using a trial-and-error approach. The foundation of the composite manufacturing process, and thus of process models, is the thermal history of the composite part during cure. Improperly curing the composite part will compromise its mechanical properties. Consequently, proper validation of the thermal model input parameters is critical, since the simulation output depends on the accuracy of the input. However, there are no standard methods to validate thermal process model input parameters. In this work, repeatable and robust methods were developed to isolate and validate the conductive heat transfer, thermochemical, and convective heat transfer sub-models. By validating the sub-models, the uncertainty of the complete thermal simulation was significantly reduced. Conductive and thermochemical material models were validated by comparing the thermal response of a material surrounded by rubber bricks to a 1-D simulation of the same materials. Four composite prepreg systems and their respective material models were tested, with agreement ranging from excellent (errors less than 1.0 °C) to poor (errors greater than 5.0 °C). Calorimetery, visual monitoring, and CFD were used to characterize the convective heat transfer environment inside the UBC autoclave. The validation methods were also used to better understand the capabilities and limitations of the autoclave. Local variations in airflow patterns and heat transfer coefficients showed that heat transfer can be highly variable in an individual piece of equipment. Simple procedures for characterization of an autoclave or oven were demonstrated. The developed methods can be used individually, or in combination, to validate thermal models and reduce uncertainties associated with the cure of composites. With further refinement, the demonstrated methods can be developed into validation standards for thermal modeling of composite materials.

Degree

thesis:*
Name thesis:degree_name
Master of Applied Science - MASc
Level thesis:degree_level
master's
Discipline thesis:degree_discipline
Materials Engineering
Grantor dc:publisher
University of British Columbia
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Slesinger, Nathan Avery

Rights

dc:rights
Statement dc:rights
  • Attribution-NonCommercial-NoDerivatives 4.0 International
Language dc:language
eng

Identifiers

dc:identifier.*
Handle dc:identifier
http://hdl.handle.net/2429/26641

Chain of custody

source
Harvested from
University of British Columbia
Base URL
circle.library.ubc.ca/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Slesinger, Nathan Avery. Thermal modeling validation techniques for thermoset polymer matrix composites. master's thesis, University of British Columbia, 2010. http://hdl.handle.net/2429/26641